Often asked: Why Is The Kick Drum So Quiet In Indie Music?

Should the kick be the loudest in the mix?

The snare is the foundation of the backbeat, and typically one of the loudest elements in the mix. Next, bring the kick fader up until it sounds almost as loud as the snare. It should be loud enough that the low frequencies are rich and powerful, but not so loud that it masks the bottom-end of the snare drum.

How do I make my kick drum more punchy?

How To Get A Punchy Kick On Every Mix

  1. Choose the right kick sample.
  2. Use EQ to fatten/tighten up the kick.
  3. Use Compression to make the kick punchy.
  4. Make Sure Your Kick Sample Is In Mono.
  5. Use Sidechain Compression To Give Space To Your Kick.

How do you EQ a kick drum?

7 Steps to a Perfect Kick

  1. Step 1 | HP Filter around 50 Hz.
  2. Step 2 | Boost for “Thump” at 60 – 90 Hz.
  3. Step 3 | Cut for “Unpleasantness” at 100 – 150 Hz.
  4. Step 4 | Cut for “Unpleasantness” at 200 – 250 Hz.
  5. Step 5 | Boost around 1.5 kHz for more “Beater” OR Cut around 2 kHz for less “Plastic”
  6. Step 6 | LP Filter around 10 kHz.
You might be interested:  Often asked: How To Be A Book Editor For Indie Books?

How loud should my vocals be in a mix?

Every vocal is different and every song is different as well. But generally speaking, lead vocal should be moderately loud or the loudest element next to your drums in your mix.

How loud should hi hats be in a mix?

The thing you want to create is a “nice even sound” as when your song gets mastered the low and top end will become much louder and much more defined than before. If you absolutely must have a volume level for your hi hats, I would suggest -20 db.

Are bigger drums louder?

Although bigger drums move more air than smaller drums, they are not necessarily louder due to several factors including drum pitch and drum resonance. In any case, a larger drum has the potential for a higher amplitude. Whether it actually sounds louder is much more complicated.

Why does hitting a drum harder make a louder sound?

You can make very loud sounds with a drum, by hitting it very hard. When you hit the drum, the skin on top vibrates up and down. The harder you hit it, the bigger the vibrations and louder the sound.

Why does my kick drum sound bad?

Hitting your bass drum off center will cause an uneven sound from your kick drum. The way a bass drum works is all about moving air inside the drum itself. If you are hitting the drum in the wrong place, you will not be getting the maximum air flow, which will cause a weaker sound.

Why do drummers put blankets in their bass drum?

There are other products like a drum ring that fits around the batter head of the bass drum to control the sound. Try placing one pillow or blanket resting on the bottom of the drum. This way you get bit more control of the air flow, as well as the resonance on the drum head without killing the sound.

You might be interested:  Often asked: What Qualifies As An Indie Dev?

Should you compress kick drum?

This is especially important with drums, which can have extremely sharp peaks on hits. Proper use of compression will let you clamp down on the tracks without crushing them, and also let you shape the snap, crack, and sustain you want in your drums.

How many Hz is a kick drum?

The frequency range of the bass and drums overlaps in the low frequency range through the low midrange. The attack of the bass is heard between 700 – 1000Hz, while the attack of the kick drum presents information at 3000 to 4000Hz.

Leave a Reply

Your email address will not be published. Required fields are marked *